adapnex::drivers::bnr_x2x::X20AT4222
B&R X20AT4222 Analog Temperature Module (4‐channel, PT100/PT1000, 2‐ or 3‐wire)
Synopsis
Declared in <adapnex/drivers/bnr_x2x/x20at4222.h>
class X20AT4222 final
: public X2XModuleEnums
Name |
Description |
Result of the module's input signal monitoring for a single channel. The measured value is reported as NaN whenever an error state is signaled. |
|
Member Functions
Name |
Description |
|
Default constructor |
Module firmware version |
|
|
|
Module hardware variant |
|
|
|
Module serial number |
|
Module location on X2X bus (slot number) |
|
Module status |
Data Members
Name |
Description |
Channel 1 measurement mapping (°C for PT100/PT1000, Ohm for resistance measurement). Use InputMappingWithError::Configure to set the measurement type. NaN indicates invalid/uninitialized. |
|
Channel 2 measurement mapping (°C for PT100/PT1000, Ohm for resistance measurement). Use InputMappingWithError::Configure to set the measurement type. NaN indicates invalid/uninitialized. |
|
Channel 3 measurement mapping (°C for PT100/PT1000, Ohm for resistance measurement). Use InputMappingWithError::Configure to set the measurement type. NaN indicates invalid/uninitialized. |
|
Channel 4 measurement mapping (°C for PT100/PT1000, Ohm for resistance measurement). Use InputMappingWithError::Configure to set the measurement type. NaN indicates invalid/uninitialized. |
Protected Member Functions
Name |
|
|
|
|
|
Protected Static Member Functions
Name |
Created with MrDocs